Author Archives: Author

What is a plumbing emergency?

leaking water

What are the most common plumbing problems?          

All of us have a different version of what is considered a plumbing emergency, but we need to consider when calling for emergency plumbing service is justified. Plumbers are not the cheapest service, and for good reason! We need our plumbing, whether it is the water coming in and not flooding or the toilet flushing without overflowing. 

A plumbing emergency repair could be as simple as a busted water line under the sink to a backed up garbage disposal or toilet. When you consider what a plumber may incur on a job, would you want to do it for less? Probably not, especially if it is an emergency plumbing service call, you can be certain it is not going to be good! 

Until you have a problem, or several problems, you won’t realize how much the plumbing in your home is a convenience and a necessity.  From that dripping kitchen faucet to that slow draining tub, no home is going to be free of having a problem at some point. What you need to realize as a homeowner is not all of these things need emergency plumbing service by a professional plumber. 

First thing to know is that plumbing emergency 24 hour service is wonderful, but it is expensive. So, if it can wait till business days and normal hours, you’ll save yourself a lot of money. Here, we list the most common of all plumbing emergency examples, some you can fix, some you need to call the plumber. 

CLOGS – DRAINS AND TOILETS

You know right away you have a clogged drain when the sink or tub isn’t draining. Or the toilet isn’t flushing all the way, leaving waste floating around in the toilet bowl.  What causes these things to happen? One morning it’s all working fine and the next day, BOOM, you need emergency plumbing service. 

  • What Causes the Clogs: Clogged and slow drains happen when the plumbing is blocked. In the bathroom, hair, soap scum, and toothpaste are the culprits usually, sometimes it is a toothpaste cap or a small toy. A clogged toilet is often from something that shouldn’t have been flushed in the first place, like a diaper, a feminine product, or too much toilet paper. 
  • How to Fix That Clog: Start with your plunger, these often are a quick fix to a simple clog. When the blockage come up close enough, pull the clump up and out. If that doesn’t work, use a plumbing snake to push it through. 

You can avoid the clogs in the toilet by only flushing toilet paper in small amounts. Make sure to keep the toilet lid closed, kids are less likely put something in them. For the bathroom sink and tub, purchase hair catchers that fit over the drain. After each use, clean the hair off and put in the trash can instead of letting it go down the drain

When should you call for emergency plumbing service? If plunging and snaking doesn’t get it clear, it is time to call the plumber.  If you have another bathroom, wait and call during regular business hours so you don’t pay the overtime. 

 LEAKS – FAUCETS AND PIPES

A leaky faucet or pipes is a common problem for homeowners. While the dripping kitchen faucet is annoying, it is also wasting water and costing you money. One dripping faucet can add up to 3,000 gallons or more over a year. That is over one trillion gallons of water across the country! Not only is that much water be wasted, but the damage a leaking pipe can cause can be devastating and expensive. 

  • What Causes the Leak: Typically, a worn out washer is the cause of dripping faucet. It could have become dislodged and tore, or simply has hardened with age. When this isn’t repaired, it will cause the valve seating to corrode, and other parts of the plumbing will begin to deteriorate. 
  • How to Fix That Leak:  Simply replace the washer in most cases. There are plenty of YouTube videos and associates at your local hardware store or home improvement store can offer advice and instructions. However, it is more than the washer, you’ll want to make a phone call to your plumber. Again, try to work around this leaking faucet and avoid an emergency plumbing service call if possible.  

Leaking faucets and pipes can be avoided by keeping a watch over them so you can see when they’re getting old. Just like us, the natural aging and wear can’t be avoided in plumbing either. By being aware of your home’s plumbing, you’ll be able to avoid needing emergency plumbing services. 

When do you need to call your plumber for a leaking faucet or pipe? When you have replaced the washer and it still leaking, there could be more to problem. You may need to replace the entire faucet, but a professional plumber can inspect the issue and advise you accordingly. 

THE TOILET – CONSTANT RUNNING

Many things can happen to a toilet, but the most annoying of all problems homeowner’s have with the toilet is when it constantly runs. It still flushing and draining, but the water won’t quit running once it fills. It is annoying because you know that is water wasting and costing money. 

  • What Causes the Constant Running: The inner parts are worn out is the most common issue, like the flapper valve isn’t fitting right. When it doesn’t seal up, it allows water to keep running. It could also be the float is out of balance or the fill tube has come loose.  
  • How to Fix That Running Water:  Check each of the internal components to determine the problem like making sure the fill tube is still attached and set to direct water into the overflow tube. Check the float is balanced and allowing the fill  valve to shut off. Make sure the chain is hooked to the rubber flapper and has enough length that the flapper can shut.  You can purchase a toilet repair kit at a big box home repair center or hardware store that will have instruction for replacing each component.  

Unfortunately, there isn’t anything you can do to avoid this from happening. The components are inside water 24/7 and they are going to go corrode, rust, and simply  wear out. a 

If the toilet is overflowing when flushed and you can’t get the water turned off (there should be a turn off valve under the tank), then you definitely need to make emergency plumbing service phone call. 

emergency repair

How do you fix plumbing problems?

 Not all  emergency plumbing issues require a phone call for emergency plumbing services. There are some plumbing repairs that you can do yourself, as we described some of them above, that will save you a lot of money over time.  However, you can make a mistake and end up making that emergency plumbing service phone call, costing yourself more money than if you had called them at first. 

If you aren’t comfortable with basic household tools and have complete understanding of the problem, call a plumber. Always know where the main shut off to the house – that can save you a lot of flooding and further damage. Have a plumber’s number on your speed dial so that you can make that emergency plumbing service phone call quickly. 

When you have to make that emergency plumbing service phone call, how much does an emergency plumber cost?  Professional plumbing emergency call out charges rates can vary from city to city and plumber to plumber.  On average, they start around $50 per hour and can go as high as $150 or more. This doesn’t include any parts they may need to use, and not all plumbers do a thorough clean up, meaning  you may need to call in a professional damage clean up company if the plumbing issue cause a major mess. Call (817) 283-0183 today for your plumbing emergency needs in Bedford, TX.

Can I install a water heater myself?

water heater

How hard is it to install a water heater?

The water heater is taken for granted today. We assume when we turn the hot water faucet on, in short time, we’ll have hot water flowing. Then when it doesn’t, we go into a shock when we have to determine what to do, when, and how. The need to purchase a water heater, installation, and how quick become a focus that we usually aren’t ready to deal with, yet we must. 

A few phone calls to plumbers for estimates of a water heater with installation can lead some homeowners to wonder, “Can I do this myself? How hard is it to install a water heater?” Or is paying for a water heater installation and removal by professionals worth the cost? Let’s answer that first question, then we’ll move on to some other questions about water heater installation. 

Well, if you have the right basic tools and you’re handy using them, no, water heater installation isn’t that difficult. You may need to have some experience at soldering copper though, and that is what will stop most homeowners from doing their own water heater installation. 

Does a plumber install a water heater?

Yes, this is the recommended way to have water heater installation done for many reasons, but one are the laws and regulations of where you reside. Before you do your own water heater installation, check with the local governing offices first. In cities, there are building codes to be followed. What that means is that it has be a licensed plumber that pulls a permit with the city, does the water heater installation, then the city inspector checks the work.  

How long does it take to install a water heater?

Owning a house can be a rewarding accomplishment, one that comes with annoying and unexpected situations, like the water heater going out. However, there are professionals that can fix that for you with a new water heater installation, and you’ll only need to make a few decisions on the matter. They do the water heater installation and take the old one away, you could be taking that hot shower by end of the day! 

There is a chance that you have had your current water heater for at least 10 to 15 years, and what you’ll be happy to know, they have improved since then! The new units are more energy-efficient for starters, and they come in various sizes from 20 gallon to 50 gallon, and you can even go with a tankless water heater system! 

You’ll want to choose the size of tank that fits your home’s lifestyle, one person, a 30 gallon water heater will suffice.  A family of 10, you may want to inquire about the tankless water heater, they never run out of hot water. These are things that your professional plumber can discuss with you and help you choose the best one for your home and budget.  Now, back to the question about how long a water heater installation can take, we’ll approach this answer based on the traditional tank water heater style. 

An experienced and licensed plumber can have a water heater installation completed within three hours if there are no complications. A breakdown in a basic water heater installation will be something along these lines: 

  • Forty-five to sixty minutes to remove the old water heater. There is the disconnecting the electrical power or gas lines, disconnecting the water lines, draining the old tank, and taking the old tank out of the house.   
  • Thirty minutes to position the new water heater. This includes unboxing and carrying it into the house, maneuvering it into the proper place and position. 
  • Forty-five to sixty minutes to connect the new water heater to the electricity or gas and the water lines. After the new water heater installation is complete, the plumber will make sure it is working (gas pilot light is on) and provide you the basic information about adjusting the heat level and homeowner maintenance. 

What water heaters do plumbers recommend?

Once upon a time, there were only two choices in water heaters: Electric or Gas.  Today, the options can be overwhelming, but we’ve researched and found the following choices: 

  • BEST OVERALL: Rheem Performance Platinum 50 Gal Natural Gas Heater
  • BEST BANG FOR THE MONEY: A.O. Smith Signature 40-Gallon Natural Gas Heater
  • ELECTRIC TANK PICK: Rheem Gladiator 50 Gal. Electric Water Heater
  • ELECTRIC TANKLESS PICK: Stiebel Eltron Tankless Water Heater, Electric
  • GAS TANK PICK: A.O. Smith Signature Premier Natural Gas Heater
  • GAS TANKLESS PICK: Rinnai High Efficiency Natural Gas Tankless Heater
  • HEAT PUMP HYBRID PICK: Rheem Performance Platinum Hybrid Electric Heater
water heater in a basement

Can a hot water heater last 20 years?

The water heaters today are made better than they were in the years past, but regular maintenance is still needed to get the most lifespan.  A gas water heater averages around 10 years and an electric water heater around 12 years.  Both can last longer of course, and with proper water heater installation and homeowner maintenance, they could last up to 15 years or longer. 

Today, a plumber will do a water heater installation with pex plumbing, this lessens the worries of frozen water pipe during the winter because PEX contracts and expands with the temperature.  Other things you can do to extend your water heater life are: 

  • Regular Maintenance Checks – looking for any gaps, leaks and address them ASAP. 
  • Test the PRV – this is a safety device to prevent explosions.
  • Tank Flushing – once a year, drain some water and if there is debris in that water, follow the manufacturer’s instructions for tank flushing. 
  • The Anode Rod – this is inside your water heater and attracts the rust you don’t want your tank filling up with. If it is covered in rust, it should be replaced.
  • Gas Line Inspection – check for cracks or corrosion and address any ASAP.  dangerous.
  • Clear the Space – keep things away from the water heater so that it has ample air circulation. 

Need help with your water heater in Bedford, TX? Winn Plumbing is here for you. Call us today at (817) 283-0183.

How Does Leak Detection Work?

How Does Leak Detection Work?

Do you have a leak? Are you wondering how leak detection systems work? If so, let’s dive into the process of how a leak detection system works.

  • A leak detection system has the ability to monitor the flow of water through a pipeline.
  • When any abnormalities occur, the system will cut off the water flow to the whole household. This is accomplished by a valve closing in the leak detector.
  • Examples of abnormalities include a tub left running for too long, a fitting bursting from behind a wall, and a toilet running overlong.
  • Leak detection systems can be connected to a smart app that can be downloaded to your phone.

When you do not have a leak detection system installed, your best course of action if you suspect a water leak is to call a licensed plumber in your area. 

water leak

What is the Best Water Leak Detector?

The best water leak detector on the market will change from year to year as products change and develop. According to the latest market research, the Water Leak Detector Starter Kit by LeakSMART is highly recommended. This is because this system is easy to install and will respond immediately to the first sign of water. Furthermore, if this system detects a leak or a freeze, the sensor will trigger an alarm. It will also send text alerts and shut off the main water supply to prevent damage.

Is There a Device to Detect Water Leaks?

While it is always possible to call a reputable plumber to detect water leaks, you may also want to invest in a smart water leak detector. If you want to prevent water damage and there is evidence that your property would benefit from a water leak detector, please feel free to investigate such devices further. Smart water leak detectors use complex algorithms and sensors to alert you to leaks through a smartphone app. These apps connect to your WiFi network. When a water leak is detected, your home’s water supply line.

How Can You Tell Where a Water Leak is Coming From?

Plumbing leak detection and repair will be essential if you have water damage and do not know where to attribute the source. If you are a homeowner and you can’t find any visible signs of a water leak inside your home, you can still find out if it is inside but hidden. You will need to locate and check your water heater. After that, you will need to turn off the stop tap so that no water is going into your house. Watch the meter and see if it begins to change. If it changes immediately, you have a fast-moving leak. Likewise, if the meter doesn’t change, wait about two hours and then check it. If the meter changed despite the water being, off, you probably have a slow leak. By checking your usage and monitoring your bill, you can find out if you have a water leak, and get a plumbing professional on the case.

Why Do I Hear Dripping In My Wall?

Do you hear dripping inside your walls? If that is the case, it could be because a faucet is running. Furthermore, if you notice the sound of falling water coming from inside a wall in your home, it’s a good time to seek out a professional plumber. Getting to the bottom of the water leak issue is very important because water damage is very serious business.

Which Leak Detection

If you are not already aware, you may want to know that there are multiple common leak detection tests. These leak detection tests include the underwater bubble test, the bubble soap paint, pressure, and vacuum decay, and tracer gas detectors. Your experienced local plumber will be able to discuss the differences between these tests when you reach out to them for your leak detection needs.

Can You Rent Leak Detection Equipment

Are you looking to rent leak detection equipment? Accommodations can be made. Apparently, an acoustic water leak detector is one of the simplest ways to discover leaks. Such a device will allow easy pinpointing and surveying for water leaks in underground pipelines.

Can Vacuum Leak Detection

Helium tests, which are also known as vacuum and sniffer tests can detect leaks that are in pipes. Experts in the industry are reputed to recommend such tests as they provide both precision and accuracy.

leak detection

Is Leak Detection Pump

The leak detection pump is a component in a vehicle that will trigger “check engine” light warnings. It’s interesting to note that when leaks occur, whether in the household or in a vehicle, those warnings are pertinent and necessary.

We are the experts when it comes to leak detection in Bedford, TX. Please reach out to us today at (817) 283-0183 to discover how we can improve your plumbing today.

Who Do You Call to Fix a Gas Line?

gas line repair

Who Do You Call to Fix a Gas Line?

Gas line installation and repair is a vital service for many, if not all homeowners. Yet the question remains: who do you call to fix a gas line? It’s important to consider that while all certified plumbers have the ability to clean and maintain pipelines, certain plumbers have specialties. For instance, a plumber who specializes in natural gas piping will be more likely to offer that service for homeowners and property owners. When you need a gas line repair, be sure to use relevant search terms. 

Do Plumbers Repair Gas Lines?

When you think of a plumber, your mind may directly go to plumbing fixtures like leaky faucets and clogged toilets. What you may not know is that there is an entire branch of the plumbing industry dedicated to gas lines. These plumbers can not only repair gas lines, they can also install them. These plumbers also have the ability to work on gas water heaters and other gas-powered appliances around the house. This expertise extends to both indoors and outdoors.

How Do You Fix a Gas Line?

A certified plumber has a rigorous set of procedures that he or she follows in order to properly repair a gas line. Generally speaking, the first thing that they will do is turn off the gas. After that, they will remove the covers and detach the gas line. The fourth step is to remove the residue gas pressure and clean the line. The surface will be scuffed and the gas line will be attached. Finally the epoxy will be applied. It is important to remember that each of these steps must be performed by a certified plumber. You don’t want to try this project on your own because it is incredibly dangerous and hazardous to your health.

Why Damaged Gas Pipe Should Be Repaired Immediately?

If you have a damaged gas pipe in your vicinity, you must act with alacrity and caution. Here are a few important reasons why homeowners should get their gas pipes repaired immediately.

  • Gas leaks can create harmful effects on your health if the gas is inhaled.
  • The gas line could short circuit and cause the house or property to catch on fire.

If you smell gas around your property, please be sure to investigate further. There could be an issue with a gas line, and if that is the case, you will want to call the fire department to shut off your gas safely. After that, you can have a gas line professional plumber come in and repair the line.

How Do You Repair a Poly Gas Line?

Are you wondering how to repair a poly gas line? The answer may surprise you. For example, the methodology you will use to repair a polyethylene pipe and fittings will depend on the amount of damage that has been sustained. If the damage is localized, you may only need to use an electrofusion saddle or a clamp fixed around the damaged area. If there is more extensive damage then the section of the pipe that is damaged will need to be removed and replaced. Overall, the most important consideration for the plumber in charge is to ensure that the integrity of the pipe is maintained throughout.

Who Does Gas Line Repair

As previously alluded to, gas line repair is a service that many, but not all, plumbers specialize in. In order to become a plumber, the plumber-in-training must pass examinations and take a mandatory amount of training. There are different levels of plumbers, such as a journeyman plumber, and a master plumber. A master plumber has the highest level of expertise and training. In order to find out which plumber will be best for you, please be certain to review credentials and only select a certified and trained plumbing company.

Gas Line Repair

There are a number of different questions that homeowners have for their plumbers. Who is proficient in keeping drains clear? How is gas line repair performed. In order to get to the bottom of these questions, it’s important to speak with a professional plumber first. If your plumbing system has not received maintenance in some time, it’s important for you to schedule an appointment for an inspection as soon as possible.

Gas Line Repair Companies

There may be a number of different gas line repair companies in your area. One of the best tools at your disposal is your smartphone or computer. Using the search term, “gas line repair near me”, you can discover nearby companies that can administer relevant services.

gas line repair

Gas Line Repair and Installation

Gas line repair and installation is an important part of homeownership. Please be certain to consult with a local professional to ascertain your best gas line repair needs.

We would be happy to help you with your gas line repair in Bedford, TX. Please reach out to us at (817) 283-0183 today!

What Causes a Drain to Get Clogged?

clogged sink filled with water

Dealing with a clogged drain

The holidays are coming up and that usually means a lot of cooking and baking, which means clean-up. The excitement and fun of holiday baking overrides the dread of the clean-up part, it’s just part of the process. That whole process can come to a standstill when you have a clogged drain though. 

When you’re in the middle of baking fudge and rolling cheese balls, cleaning a clogged drain is not something you want to deal with, but unclog you must! The best way to avoid that this year would be to know what the causes of clogged drains are and avoid them. When you know what causes a drain to clog and how to keep it from happening, it can make your holiday baking much easier and pleasant! 

How does a clogged drain happen?

There are different causes for bathroom clogged drains and kitchen clogged drains.  This article, we’re going to focus on the kitchen clogged drain. A clogged drain in the kitchen sink typically happen when we’re cooking and there is cooking grease or oil poured into the drain. It cakes onto drainpipe walls, then when detergent soap and un-dissolved food particles are poured down the drain, it will gunk up and then you got a clogged drain. 

Lack of venting can cause a clogged drain too. Vents allow air to enter the drainpipe as it drains. When there is enough air entering the vent, the drain works properly, but when there isn’t enough venting, the sewer gas can’t escape and a what appears to be a clogged drain happens. Venting affects the bathroom more than the kitchen plumbing, but if you have a clog down in the main pipe going to the sewer, you could suffer the effects of it in the kitchen too. 

What to use to clean blocked drain?

If you have a clogged drain in the kitchen, here are few suggestions on how to get that clog out so that you can get back to your holiday baking: 

  • Try plunging with a cup-style plunger. Most small clogs can be dislodged in this matter. Make sure the is water in the sink so that the plunger head is covered. Keep the head of the plunger tightly sealed against the drain opening and rapidly plunge up and down. 
  • If that doesn’t clear the clogged drain, clamp off the dishwasher’s flexible hose, and try this plunging process again. 
  • Still have a clogged drain. Pour a half-gallon of boiling water into the sink. If you still have a clogged drain, wait 30 minutes for that water to cool down in the drain, then repeat with boiling hot water.
  • If there is still a clogged drain, check the garbage disposal by turning it on. This can often break up the clog, but if it doesn’t make sure it hasn’t overheated and check the reset button. If the button is pushed, try running the garbage disposal again. 
  • An all-natural method to try if you still have clogged drain is a  baking soda and white vinegar mixture. Combine one cup of each and with one drain covered (a double sink), pour the mixture in the other drain and let set fifteen minutes. Then allow hot water to run for fifteen minutes.

If all of these efforts fail, try your wet dry vacuum and if that fails, call your local plumber. You may have to pay a holiday or weekend rate, but it may be worth it to get your holiday baking done. 

Is Drano really bad for pipes?

Professional plumbers will rarely recommend using an over-the-counter drain cleaner like Drano. Plumbers have been called to homes to fix the extensive damage that a product like Drano causes. Two major problems when using Drano: 

  1. While Drano is sitting in the pipe to open the clogged drain, it is also eating away at the glue holding the pipes and the pipes themselves. 
  2. Drano is unpredictable when used in combination of other products or with equipment like an auger plunger. The chemical mixture that is sitting on top of the clogged drain will splash up and can burn the eyes or skin of the person holding the auger or plunger. 

How do you unclog a drain naturally?

A few options to try to open a clogged drain that is all natural products are: 

  1. Boil half a gallon of water and add 2 or 3 tablespoons of liquid dish soap then slowly pour the mixture in the drain. This works best on grease clogged drains and may take several rounds to get the clogged drain open.
  2. Pour half a cup of baking soda into the clogged drain then pour half a cup of vinegar. Place the drain plug on and wait one hour. Remove the plug and pour one gallon boiling hot water and keep adding more boiling hot water until the clogged drain opens. 
  3. Pour one-fourth cup salt, one-fourth cup Borax, and half cup of vinegar into the clogged drain, followed by one gallon boiling hot water. Let the mixture sit one hour and then rinse down with tap water running for a few minutes.
  4. Mix half cup of baking soda with half cup of salt and pour into clogged drain. Allow to sit for thirty minutes then add gallon of boiling hot water. 
drain cleared

Can too much baking soda clog a drain?

No, baking soda and vinegar create a natural reaction for a clogged drain that doesn’t eat the pipe or build up pressure. What if none of these tricks work to unclog your kitchen drain? Well, you’ll have to call a professional plumber. Your next question is “How much does it cost to clean a clogged drain?” and the answer to that is “It depends.” Pricing can vary from area to area, but nationwide, the average plumber will charge $150 to $200 to open up a clogged drain. This will cover the search for the clog and open the clog.

Sometimes, professional drain cleaning is necessary. Need expert plumbing services in Bedford, TX? Call (817) 283-0183 today.

How to tell if you have a slab leak

crack water leak

What causes a leak in the slab?

Before we discuss how to tell if you have a slab leak and what a slab leak detection is, let’s explain what a slab leak for those is that those that may not understand.  The slab is what they build your home on, the concrete foundation. The home builder will run sewer and water lines before they pour the slab. 

Over time, those lines will deteriorate, break or leak, and that is what results in a slab leak.  Slab leaks also result from a chemical reaction between the metal and the soil or faulty installation.  Many times, it is the soil shifting under the slab, a common problem in this part of the southern part of the United States.

How serious is a slab leak?

A slab leak may start out as a minor matter, but left unattended, it can cause serious problems inside and outside of your home.  Often, before a homeowner realizes they have a slab leak, they have paid for it financially through higher electric and water bills. If you realize you have unexplained higher utilities, a professional slab leak detection can be an enormous help. When a slab leak is left unattended, the following issues can happen:

  • Carpeting and flooring ruined: When water has been seeping through the floor, it will begin to weaken the flooring, cracking tile, saturating the floors, and soaking the carpeting.
  • Musty odor: A slab leak left unattended will create musty odor into your home. If the slab leak is from the sewer line, your home will overtake by the smell of raw sewage.
  • Mold growth. As the water seeps into your home from the foundation, the drywall and wood frame will absorb that water where it will grow mold and other bacteria. These growths are harmful to the health of you and your family, even the family pets. 

Now that you know what can happen inside your home from without slab leak detection or repair, let’s review what happens in the exterior.

  • Foundation damage:  Where slab leak detection isn’t used, it compromises the structural integrity as it weakens the concrete and steel supports. Eventually, the slab leak and water pressure will cause the foundation to shift, can could lead to a cracked or collapsed foundation.
  • Yard damage:  Sometimes a slab leak comes from pipes that run underground through your yard. This will rot the grass and ruin your landscaping. Any brick or concrete driveways, paths, or walkways will crack, and swimming pools can crack. 

How do you find a leak under a slab?

Well, if you aren’t fortunate enough to have slab leak detection equipment, there are some slab leak signs that are a hint of potential slab leak. Here is how to spot a slab leak:

  • Damp spots in the floor: Leaking water lines will create damp spots on the floor and if the leak is from the water heater, the spots will be warm. Best slab leak detection you can have is walk around bare-footed. 
  • Sound of rushing water: If you hear water rushing underneath the flooring, you don’t need any slab leak detection equipment to know you have a slab leak. 
  • Water bill increase:  A broken water line allows water to run continuously and that will raise your water bill. If you’ve noticed that your water bill jumped up a large amount from one month to the next, you need a plumber with slab leak detection equipment and experience. 

A sewer line slab leak is more challenging to detect and will go unnoticed until the damage is severe. One of the most visible signs that you have a slab leak is if portions of your flooring are buckling. This would mean your slab is heaving from a water leak. 

How does slab leak detection work? 

There are elusive slab leaks that can only be found with slab leak detection equipment and slab leak testing with specific methods and a variety of equipment used for slab leak detection and tracing, such as static pressure testing, camera pipe inspection, and sonar. Another slab leak detection used by plumbers today is helium detection equipment. The water is turned off and the air is pumped into the lines. The air forces any water still in the lines to come out where the slab leaks may be.  These slab leak detection methods give a plumber a more exact sign where the leak is within the slab so they can go right to the problem. In years past, it required the plumber jack hammering a home’s slab until they found the leak. 

Slab foundation

How much does slab leak detection cost? 

As with anything, pricing can vary from house to house, region to region. A city plumber may charge more for a slab leak detection in town than a rural plumber would for a house out in the country.  Because they will have to work with concrete (the slab), they will need to use any of the equipment we’ve mentioned here, and the process is sometimes time consuming, depending on the size of the house. 

Typically, the rates in this are start around $150 and can reach $400 or more. Some plumbers charge by the job, others by the hour.  You want to verify this pricing before they do the work so there aren’t any more surprises than the slab leak.  When it comes to repairing the leak, you can expect that cost to start around $2,000 and go up from there. 

There are many things that you need to be aware of as a homeowner, and slab leaks are one of them. To protect your home, be aware of the indications we’ve discussed here and once you have any suspicions of a slab leak, call a qualified plumber with slab leak detection equipment and experience. Call (817) 283-0183 today for slab leak detection in Bedford, TX.

What is the most frequent failure part in a typical faucet?

drip from faucet

Why is my faucet still dripping?     

Most of us have heard the phrase “got a faucet leaking like a sieve”, or maybe that’s a Texas phrase.  What it means, to those who never heard the phrase, the water faucet is no longer dripping, it is now a constant stream of water coming out, even though the faucet is turned off. This is annoying, wasteful of a natural resource, and it is costing you money! A faucet repair is usually something pretty simple that anyone can do, read on: 

You may not realize it until you have a dripping or leaking faucet, but we use them every day, all day. They indispensable in our daily lives at home, at work, at any structure that has running water. This is why faucet repair is important to keep them in proper working order. 

A dripping or running faucet can disturb your sleep, increase the water bill, and if a faucet repair isn’t done soon, it can go from an annoying level to a catastrophic level.  The following are typical issues that can cause a dripping or leaky faucet. 

The O-Ring:

At the top of a cartridge faucet handle, there is a stem screw that holds the handle in place. Under that stem screw is a small disc referred to as the O ring. This is one of the main places that a drip will begin. The O ring becomes loose or simply wears out over time. This can be replaced easily, usually without having to turn the water off.  regular use, causing the faucet to drip near the handle. This faucet repair can be done by replacing the damaged O ring will fix it if this is the issue. 

The Valve Seat:

The valve seat is what connects the faucet to the spout, creating a compression mechanism. In this area, sediment from the water accumulates and corrodes the valve seat which leads to the spout leaking. This is the faucet repair job for either an experienced homeowner or hiring a professional plumber. 

The Washer:

Another common area for a dripping compression faucet because of constant use wears it out. Each time you turn the faucet on, the washer is forced next to the valve seat, creating a constant friction. That constant friction wears out the washer and the result is dripping water around the spout. This faucet repair is done by replacing the worn-out rubber washer. can be mended by replacing the washer. 

If the washer is installed wrong, even the least bit askew, or isn’t the right size, the faucet will still leak. You can try to replace it again, maybe even adjust the washer you installed, or call a professional plumber.

Is a leaky faucet dangerous?

If you’re asking that the faucet repair in bathroom that you’ve ignored for the last six months will flood the world, no. Right now, it may be nothing more than an annoying dripping or leaking faucet, but at some point, you need to address the issue. If not for your own sanity and water bill, but for the good of the world. Yes, your lack of not getting that faucet repaired is contributing to a shortage of one of our natural resources. 

Approximately, 10,000 gallons of water is wasted in every American home each year according to the United States Environmental Protection Agency. That is enough water to fill an average sized swimming pool. What is the most common issue of this much wasted water? 

  • Dripping Faucet
  • Leaking Toilet Flapper
  • Leaking Faucet Valves

Each of those things can be an easy faucet repair, usually by the homeowner, and definitely by a professional plumber. If that doesn’t give you a wake-up call to get those things fixed, then think about this:  That dripping or leaking faucet is costing you an additional as much as 10% more on your water bill.  Other dangers that are possible by not getting that faucet repaired: 

As a homeowner, you are most likely familiar with the various tasks and projects that it takes to keep your home in great condition and maintain its visual appeal and functional quality. Unfortunately, with some many things to keep track of as a homeowner, you might find it difficult sometimes to keep track of what is a priority and what isn’t. This can be the case especially when it comes to your home’s plumbing fixtures. To help highlight the importance of taking care of these kinds of issues right away, and not putting them off until it is more convenient, we have put together a short list of the top four dangers that can arise from ignoring a leaky faucet.

  • Wasted Water: Maybe being eco-friendly isn’t a concern of yours but take a moment to realize how much waster your home could be wasting for others that are concerned. Conserving energy is something that every homeowner should be concerned about, whether it is fresh water or their waste that could e recycled.  That one leaking faucet can be wasting almost 4,000 drips in one day, equal to one liter of water.  
  • Rusting: Metal and moisture are not friends, so by ignoring that faucet repair your bathroom needs, you’re allowing moisture to be exposed to the metal under your sink and house. This is going to start rusting the metal piping inside and under your house. When that rust builds up inside the plumbing lines coming from the steel pipes, valves get clogged. Then you go from that annoying drip or leak to pipes busting because of rust. 
  • Rotting: That faucet repair you’ve been ignoring has probably already stated affecting the surfaces that surround it.  The cabinets, countertops, flooring, and walls are at risk of getting warped, cracked, and rotted from that continuous drip or leak. Not only is this rotting and warped wood unappealing, but dangerous by causing the cabinetry and floors to become weak and unable to support the items you have on them. 
  • Mildew and Mold: That leaking faucet will result in mildew and mold growth inside your home, an unattractive feature that is also dangerous to the health of your family. You’ll notice a musty odor, or maybe see stains around that leaking faucet.  By ignoring that faucet repair, your family could develop breathing issues or skin irritations. When that happen, that faucet repair has become an urgent matter. 

How do you fix a slow dripping faucet?

That leaking faucet in the bathroom or kitchen is wasting water and money. This can be a simple repair even the newest DIYer by following these steps to do your own faucet repair: 

  • Step One: Turn the water off under the sink or at the main line outside your home, typically at the water meter. 
  • Step Two: Take any decorative handle parts off by prying up with a flat-head screwdriver. Under that you’ll find a screw, remove gently with the same screwdriver.
  • Step Three: Using a wrench, loosen the nut and you’ll find the stem screw. Remove it and examine to see if there is any damaged in the area.  
  • Step Four: If no obvious damage, look at the O-ring and washer. Replace both. Make sure they fit properly, or you’ll still have a leak.  
  • Step Five: Now reassemble carefully in reverse order you removed it all, then slowly turn the faucet on to test. If you still have a leak, time to call a professional plumber for faucet repair job. 

If your faucet is a single handle, a leak will require to repair faucet ball, which is a bit more entailed and best to call a professional plumber. 

faucet flowing normally after replacement

Will replacing a faucet stop it from leaking?

No matter how hard or far you turn the faucet handle on the bathroom sink, it won’t quit dripping. Does this mean you need a new faucet? Not necessarily.  You can follow the steps we listed above and attempt a faucet repair job yourself or call a professional plumber. 

If you’ve done what you can or had a plumber attempt a faucet repair and there is still a drip or leak, you should replace the faucet. Keep in mind, if it is not assembled and installed properly, you may still have a drip or leak. If you don’t feel confident doing this yourself, it is worth calling a professional plumber to install a new faucet.

What happens if you don’t fix a leaky faucet?

We covered this earlier in the article, and all of it can be avoided or minimized by addressing any faucet repair as soon as it is noticed, no matter how small the drip may seem. The damage from excess moisture from a dripping or leaking faucet can be costly in many ways. Not only for you personally, but it will cost the Earth a natural resource. 

If you’re experiencing low water pressure, it isn’t always because you need a faucet repair. Low water pressure can sometimes be caused by a water line break. That break could be under your house or in the water line running from your house to the water main.  Or it could be a break in the city’s water line affecting all the homes in the area. A clogged aerator can cause a kitchen faucet to have low water pressure, or a clogged cartridge. These are basic faucet repairs that any homeowner can do with a little patience and video watching! For your faucet repair needs in Bedford, TX, call (817) 283-0183 today!

What Do I Do If I Smell Gas?

What Do I Do If I Smell Gas?

Are you wondering what you should do if you smell gas in the home? This is a very pertinent question because it relates to your personal safety, and the safety of your family and neighbors. Please review the following list to find out more.

  • Are you smelling natural gas? Natural gas smells like rotten eggs or sulfur. If you happen to smell natural gas inside or outside of the home, it is urgent that you act accordingly.
  • If you smell natural gas near your stove, turn off your stove and the gas line, and open all of the doors and windows in the home. Evacuate the premises and call 911. Calling an emergency hotline will help you get appropriate assistance with your gas leak crisis.
  • The fire department or the gas company will visit and should inspect the home. Once it is deemed safe to enter, it will be important for you to find the cause of the smell. That is where Winn Plumbing can provide assistance.

A qualified, licensed plumber who specializes in gas line repair will have the appropriate qualifications to inspect your gas line and complete the necessary repairs. The more training and licenses a plumber has, the safer the processes.

gas leak

Can Leaking Gas Kill You?

If you inhale a high concentration of natural gas it can be very bad for you. Inhaling natural gas can lead to asphyxia. The symptoms of asphyxia include fatigue and chest pain. When carbon monoxide replaces the oxygen that would normally be inhaled by the lungs, oxygen deprivation takes place. This is naturally extremely hazardous and can kill individuals.

What are the Signs of a Gas Leak In Your Home?

The physical symptoms of a gas leak can be difficult to ignore if they are occurring in your household. Common physical symptoms of suffering from a gas leak include headache, dizziness, nausea, eye and throat irritation, fatigue, breathing problems, and more. If an individual comes into contact with compressed or liquid gas, they could get blisters or pale skin.

Can You Smell a Gas Leak?

Interestingly enough, natural gas does not have a smell to it. For safety purposes, utility companies add mercaptan, which is a harmless chemical, to the gas. Mercaptan smells like rotten eggs and sulfur. This pungent smell helps homeowners and inhabitants identify when there is a gas leak and creates an opportunity to avoid catastrophe.

Will a Carbon Monoxide Detector Detect a Gas Leak?

Unfortunately, carbon monoxide detectors are not capable of detecting natural gas leaks unless otherwise stated. As previously mentioned, however, natural gas companies will often put an additive in the natural gas that gives it the smell of rotting eggs or sulfur. Because this smell is so pungent, it is relatively easy for inhabitants of the home to locate the smell.

Gas leak in House

Gas line repair and installation are very important for the function and efficiency of a home. If you suspect that your home has a gas leak, it is urgent that you evacuate the home immediately and dial 911. Once your gas company or fire department has located the source of the gas leak and secured the home, it is important for you to next call a reliable, licensed, and insured plumber. Gas lines are similar to plumbing lines, but require experience and finesse, which will be important to keep in mind.

Gas Leak Near Meter

Do you have a gas leak near your meter? The process will be very similar and straightforward to a gas leak in the home. It is urgent that you contact 911 as soon as possible and have the source of the gas leak accurately diagnosed. 

Gas Leak Without Smell

Natural gas does not have a smell. That means that a tiny leak would be practically impossible to detect. Additionally, it is difficult to discern a small hissing sound if it is at all present. Mercaptan is the chemical that helps individuals identify gas leaks.

gas leak

Gas Leak Near Water Heater

Are you wondering what causes gas leaks near water heaters? The answer is fairly simple. Over time, the seal between the gas water heater and the gas line can degrade and loosen. This process will cause small amounts of gas to leak over time. In addition, it is important to consider rust buildup, faulty gas valves, and cracked sealants which can all result in a gas leak. That is why it is important to have yearly plumbing inspections if at all possible. Regular household inspections of all the plumbing fixtures will greatly assist in navigating any potential gas leak problems.

Do you believe that you have a gas leak in your home? Do you require professional assistance? Our friendly operators at Winn Plumbing are available now at (817) 283-0183. Find out more about what we can do for your gas leak in Bedford, TX.

How do you tell if your drain is clogged?

Person cleaning dishes in kitchen sink

When the drain works slowly

That really seems like a silly question doesn’t it?  “How do you tell if your drain is clogged?”.  Simple, the water isn’t going down the drain would be the indicator you have a clogged drain. One of the most aggravating things you can have happen! You’ve got dishes stacked up, company is coming, and both sides of the sink are full of water that isn’t going anywhere. 

A better question would be, “How did I get a clogged drain in the kitchen?”. That’s typically caused by what you’ve poured down the drain: 

  • Grease – It may have appeared to be liquid when you poured it in the drain, but it coagulates once it’s in the pipes and water hits it. Then, POOF, you have a clogged drain. 
  • Coffee grounds & Eggshells – These substances get heavy when they get wet, and if they’re poured on top of grease, that’s been poured down the drain, you will have one major clogged drain. 
  • Beans, Pasta, Potatoes, and Rice – These may good meals for your family, but the kitchen drain doesn’t like them. When water gets mixed with them, you end up with a paste-like material coating the pipe insides and then a clogged drain.   

When it comes to bathroom drains in the sink and tub, the normal culprits are grime, hair, and soap scum.  Then there is the toilet – what clogs a toilet? Well, there are a few things that cause that clogged drain and you will notice a common element between all these things we’ve listed: 

Low-Flow Toilet

They design toilets today as a low flow with the goal of saving water, a natural resource and a contributor to the monthly water bill. The earlier low flow toilets from the 1990s did not have the pressure necessary to clear the drain and internal trap, thus a clogged drain would happen. If your toilet is from the 1990s or before, that is probably why you’re having a frequent clogged drain. No need to rush out and buy a new one, but until you do, minimize what it flushes in the toilet.

Non-Flushable Items

Believe it or not, not everything that is paper material for the human body is meant to be flushed in the toilet. We’re talking about disposable diapers, feminine hygiene products, cotton balls, cotton swabs, dental floss, wet wipes, and even toilet paper is iffy.

Trap Is Blocked

The curved part of the toilet base on the back sides is the trap. It holds water from flushing down so that sewer gases can’t escape into your home. Guess what?  When you flush those non-flushable items, even toilet paper, it can become clogged in the trap and then you have a backed-up toilet because it now has a clogged drain. 

Blocked Plumbing Vent

Roof vents are required on houses today, especially for the modern toilets and other plumbing fixtures. They fresh air is funneled into the plumbing system to prevent a vacuum with air-pressure that slows a drain flowing. These vents can get blocked by animal nests, leaves, and small sticks, causing you to have a clogged drain. 

Problems with Main Sewer Line

If you are noticing regular clogged drains throughout your house, and you’ve checked the roof vent, then it could be something wrong at the main sewer line.  On your side of the line, it could be from those items we’ve mentioned that shouldn’t be flushed, or it could be tree roots have busted through a pipe. 

How do you dissolve hair in a drain? 

If the sink or tub isn’t draining, you probably have a clogged drain with hair and soap scum. If you’re wondering what product to buy that will break up that clog, try one of these “natural’ cleaners first: 

  • Baking Soda, Vinegar, and Water: Boil some water and pour it into the clogged drain. Mix one-fourth baking soda with one cup water and pour that into the clogged drain. Wait 15 minutes, then pour boiling water in the drain again. You should see a free running drain now.  If not, repeat the process or try one of these: 
  • Baking Soda, Salt, and Water: This time mix one cup of baking soda with 1/2 cup of salt and pour down the clogged drain. Allow to sit overnight as it fuzzes up and dissolve hairballs. The next morning, pour two cups of boiling water into the clogged drain. 
  • Household Bleach: You want to avoid chemicals, but sometimes a clogged drain needs some chemical muscles. A clogged drain bleach therapy won’t harm your pipes while it dissolves the hair balls.  Pour one cup of liquid bleach into the clogged drain and let it sit 30 minutes. If there is still clog there, pour another cup of bleach.  Wear gloves and goggles while doing this to protect your eyes and hands.
  • Hook It or Snake It: Tried and true, this old method still has one of the highest success rates in removing hair from clogged drains. Most people will use a wire clothes hanger or any item that is firm, thin and has a curved end.  You can also purchase a plumber’s snake at your local home improvement store.   

If none of these remedies work, you need to call a professional plumber. The clogged drain may be more than hair and soap scum. 

How do you unclog a deep clogged?   

Purchase an auger at your local home improvement store and follow these steps. This should get your deep clogged drain clean and get the water flowing again.

  1. Take the drain cap off.
  2. Push the auger down into the drain and turn the auger handle clockwise.
  3. Push the auger into the clogged drain firmly.
  4. Pull the auger back, the clog will break apart as you do.
  5. Push the auger into the drain again, repeating the process.
  6. Once you feel you have pulled out the blockage, completely pull the auger out. 

If this doesn’t get your clogged drain opened up again, call your local plumber. The problem could be deeper than you realize. 

Why is my drain still clogged? 

If water is draining in the sink and not the tub, or vice versa, it could be the clogged drain is past where the drains meet.  This may take the services of a professional plumber that can get use his camera to find the clog.  It could be the vent on the roof is blocked, which is something you could check yourself if you don’t have a problem climbing a ladder to look.  Otherwise, a plumber would be the one to call. 

drain working correctly

How do plumbers clear blocked drains? 

Plumbing professionals have equipment, tools, and skills to help them find where clogged drains are clogged. Some techniques they use to unblock a drain once they find it are: 

  • Tree roots: A clogged drain is often caused by tree roots bursting through the drainpipe and blocking it. A professional plumber will have the right equipment and skills to clear the tree roots, patch the pipe, and get your drain running again. 
  • Camera inspection: Plumbers today have added a video snake to their tools. This allows them to inspect a system on a wireless monitor to determine the nature of the clogged rain inside the pipes. From that, they can determine how they need to approach the problem.   
  • Cable clearing: Among the variety of tools that a professional plumber has, the basic hand snakes are still around and they also use a powerful drain machine to clear larger sewer pipes and eliminate clogs.
  • Hydro jetting: A newer method that not all plumbers are on board with and many will make it their last resort to clear a clogged drain and sewer. 

How do you flush a drain? 

Whether or not you’re having clogged drain issues, flushing the drain 2 or 3 times a year is always a good idea to keep it from happening.  Pour half a cup of baking soda and half a cup of vinegar into each drain, then run hot water in the drain for a few minutes.  This may foam up while it is clearing any debris, killing bacteria, and removing odors. 

Plumbing is a necessity that we have all grown used to having. When you need quality drain unclogging services in Bedford, TX, Winn Plumbing is here for you. Give us a call today at (817) 283-0183

What Are the Signs of a Gas Leak in Your Home?

What Are the Signs of a Gas Leak in Your Home?

Homeowners should be aware that there are a number of signs and symptoms to be aware of when it comes to a possible gas leak.

  • The smell of rotten eggs or sulfur.
  • A whistling or hissing sound near a gas line.
  • The gas pipe is damaged.
  • Dead houseplants.
  • Bubbles in the water.
  • A dust cloud, or a white cloud near a gas line.

If you have witnessed one or more of these signs or symptoms, it is important for you to contact a reliable gas line repairman and follow organized protocol. This protocol includes evacuating all family members and pets from the home. The doors should be left open, and you can call the local fire department or your gas company.

A gas leak can impair the function of your home.

Can a Gas Leak In Your House Kill You?

A gas leak in your home has the propensity to kill you or individuals in the home. That’s why it’s so important to find and diagnose gas leaks before they cause trouble in your household. A natural gas leak in your home can increase the chance of fire and explosions since gas provides fuel for the fire. Any electrical sparks or sources of fire in the home could ignite into an explosion provided that the opportunity is presented. While it is true that natural gas is advertised as a safe and clean-burning energy source, it is important for homeowners to be aware of the risks.

What Do I Do If I Smell Gas

If you smell gas, there are a number of things that you can to increase your personal safety. According to a national safety website, the first thing that homeowners should do is open doors and windows in the home to let in the fresh air. The next thing that should be done is to turn off the gas at the mains tap, which is usually near the gas meter. Next, it is recommended that all individuals leave the property. That includes pets. Finally, homeowners can call the gas company, or their local fire department to notify them that there is a gas leak in the home.

Can A Gas Leak Make You Sick?

Gas leaks can make individuals sick. Gas leaks can manifest in symptoms of sickness in individuals. Gas contains carbon monoxide, which can lead to carbon monoxide poisoning in people and animals. As previously noted, gas leaks increase the risk of fire and explosion in your home. At low levels, hydrogen sulfide gas has an odor that is similar to rotten eggs. Normally, natural gas does not have a smell. The smell of sulfur is chemically added to natural gas to help homeowners recognize the smell. Regardless, it is important to note and remember that gas leaks are very bad and should be addressed immediately.

Does Natural Gas Smell Like Skunk?

The smell of skunk, or rotten eggs, is a chemical additive that is called mercaptan. It is chemically added to natural gas to alert homeowners of danger in the household. 

Can Gas Leak Make You Dizzy

Gas line repair and installation is vital in circumstances where you think you may have a gas leak. With regard to the question of whether gas leaks make you dizzy, it is important to consider what the composition of natural gas is. Natural gas is mostly made out of methane, but it also contains small amounts of ethane, propane, butane, and pentane. You may ask what methane is. The answer is that methane is a combination of hydrogen and carbon. It’s formed when animals and plants are trapped beneath the layers of sediment in the earth.

What is Gas Leak Repair

For both safety and efficiency reasons, it is important for gas lines to be in perfect working order. Because gas is very bad for individuals to inhale, it can cause dizziness, health problems, and even death. Gas leak repair is performed by qualified, certified and insured specialists who know how to repair and replace gas lines. 

How to Report Gas Leak

According to where you are in the world, it is possible to call the authorities. Each nation and state has a slightly different number. Please take the time to research the gas leak service in your area. It is also a welcome opportunity for you to find the numbers of the local fire department and your gas utility company.

A gas leak can be very dangerous

Can Gas Leak Cause High Blood Pressure

There are a number of different symptoms that can affect individuals. These symptoms include headaches, dizziness, nausea, fatigue, breathing problems, and pale skin or blisters, which occur when the skin comes in contact with compressed or liquid gas. High blood pressure may or may not occur after prolonged exposure. However, it is never good to be exposed to natural gas for any length of time.

Have you experienced one of these gas leak issues? Our friendly operators at Winn Plumbing are available now at (817) 283-0183 to schedule an inspection for your gas leak in Bedford, TX.